Stroths MJ Utilities 1.6 -SIP Info & More *8/2 UPDATE*

antman1 · Post by **antman1** » Wed Apr 28, 2010 5:55 pm

I believe I found my pw on my magicjack but I cannot get it to register on my ATA or my iPhone to register. They both fail. I have two magicjacks, I have the pw for my other one as well and it does register but this new one does not want to do it. What could I be doing wrong? I do not have the dongle with me, it is in another state but I do have 5 dumps from it and have consistantly found the same 20 character pw. Any help would be much appreciated. My plan is to use this MagicJack for my iPhone and my other is for my ATA at home.

neo2121 · Post by **neo2121** » Wed Apr 28, 2010 10:58 pm

Well it seems like you have found your password, For the Iphone there is only one solution that works and it requires the iphone to be jailbroken. There is a a post how to install and configure Siphon Beta on the forum here. Feel free to e-mail me if you would like some private help on getting things set up correctly

antman1 · Post by **antman1** » Fri Apr 30, 2010 1:03 pm

I just wanted to come back and give big Kudos to neo2121 for his help. He helped me make sure my info was correct and then informed me that my Siphon was an older version. After reading his thread about the beta Siphon I was able to install the newest Siphon and all is great. Thank you a lot neo2121.

kawikaratekid · Post by **kawikaratekid** » Fri Apr 30, 2010 8:33 pm

Okay so I've dumped my magicjack but I can't find the password. Does anyone have a sample of what it looks like? What may be around the password? Letters, numbers etc... I'm also planning on using the magicjack with my iPhone. I have siphon downloaded and ready to go. Just need this damn password

neo2121 · Post by **neo2121** » Fri Apr 30, 2010 9:33 pm

Note: The password has been changed, also you can ignore the numbers before each line its just line number from the text editor that I use.

Ok Here it goes, the secret to my success at finding passwords. I use this same list when I do a remote recovery. What you are looking at here is from a dump file that I know the password from using a private tool. I then ran a script to find every time the password showed up. So then I just copied a few lines above and below.

The password never seems to show up in the same place consistently, So best way I have found to find the password is to do a search for some of the lines that the password has occurred around.

I always start with "EnforceDialPlanPattern" then I try "EnableTelephoneEvents" Chances are it wont be around either of these but it will be close by close I mean with in 100 - 200 lines so just scroll and keep your eyes open for something that looks like "BP6XSV7JQZ92Q70HQQ0A" to me it just jumps out to my after about 4 -5 Newcastle (Beer).

Seems like in dumps from Vista or windows 7 the first occurrence of the password is about a 1/4 of the way down from the top. And in XP dumps it seems to be 3/4's of the way down or 1/4 way up from the bottom (depending on how you look at life

)

I don't know how else to explain how to find the password I really just search for one of these and then just scroll around till I see the password. One thing to keep in mind is that the Mac method still works very well and can be found in a matter seconds every time so if you know a friend with a mac use them. Or if have a few hours to spare install OS x on your PC (not very hard) anyway I hope this helps some find the password, if you still cant refer to my signature.

Code: Select all

543014-resid:Scripts/SJUtils
543015-resid:Scripts/Dumper
543016:BP6XSV7JQZ92Q70HQQ0A
543017-application/dtmf-relay
543018-resid:Scripts/Bugreport
--
544863-SJHandsetMagicJack.dll
544864-SJHandsetMagicJack.dll
544865:BP6XSV7JQZ92Q70HQQ0A
544866-EnableTelephoneEvents
544867-TCPRequireAccessible
--
544895-ProgressContacts0001
544896-ProgressContacts0001
544897:BP6XSV7JQZ92Q70HQQ0A
544898:BP6XSV7JQZ92Q70HQQ0A
544899-EnforceDialPlanPattern
544900-NetworkContactsPassword
--
546526-resid:Scripts/NC_State
546527-resid:Scripts/Bugreport
546528:BP6XSV7JQZ92Q70HQQ0A
546529-application/dtmf-relay
546530-http://www.weather.com
546531-SIPSessionTimerEnabled
546532-EnableTelephoneEvents
546533:BP6XSV7JQZ92Q70HQQ0A
546534-IDC_DIGIT_7
546535-++++++++++++++++++++++++
--
547024-ProgressContactsFailed
547025-ProgressContactsFailed
547026:BP6XSV7JQZ92Q70HQQ0A
547027-ProgressContactsFailed
547028-ProgressContactsFailed
--
547038-ProgressContacts0001
547039-resid:Scripts/Options
547040:BP6XSV7JQZ92Q70HQQ0A
547041-resid:Scripts/Bugreport
547042:BP6XSV7JQZ92Q70HQQ0A
547043-resid:Scripts/NC_Merge
547044-ProgressContacts0001
547045:BP6XSV7JQZ92Q70HQQ0A
547046-resid:Scripts/NC_Common
547047-ProgressContactsFailed
--
547053-resid:Scripts/PropList
547054-StratusBugWorkaround
547055:BP6XSV7JQZ92Q70HQQ0A
547056-NetworkContactsPassword
547057-ProgressContactsFailed
--
553534-BandwidthHighNormalOn
553535-BandwidthLowSelected
553536:BP6XSV7JQZ92Q70HQQ0A
553537-EnableTelephoneEvents
553538-SIPSessionTimerEnabled
--
554412-application/dtmf-relay
[email protected]
554414:BP6XSV7JQZ92Q70HQQ0A
554415-ProgressContacts0001
554416-http://www.sjlabs.com
--
555739-SIP.Connection.Refresh
555740-SIPClientAuthUseCache
555741:BP6XSV7JQZ92Q70HQQ0A
555742-BandwidthHighNormalOn
555743-BandwidthHighNormalOn
--
555745-BandwidthHighNormalOn
555746-BandwidthLowSelected
555747:BP6XSV7JQZ92Q70HQQ0A
555748-EnableTelephoneEvents
555749-SIPSessionTimerEnabled
--
558840-udp
558841-ransport=udp
558842:BP6XSV7JQZ92Q70HQQ0A
558843-lastUsedAudioCodecOut
558844-ProgressCallsFailed
--
559071-SoftwareUpdateChecksum
559072-EnforceDialPlanPattern
559073:BP6XSV7JQZ92Q70HQQ0A
559074-116
559075-UserDomain
--
559114-ServerURLFn1FS
559115-YDkmW
559116:BP6XSV7JQZ92Q70HQQ0A
559117-EnableTelephoneEvents
559118-SIPSessionTimerEnabled
--
[email protected]
559910-resid:Scripts/Profile
559911:BP6XSV7JQZ92Q70HQQ0A
559912-resid:Scripts/PropList
559913-StratusBugWorkaround
--
1601042-ProgressContacts0001
1601043-ProgressContacts0001
1601044:BP6XSV7JQZ92Q70HQQ0A
1601045-ProgressContactsFailed
1601046-ProgressContactsFailed
--
1601243-Audio_G729IPP_Encoder
1601244-Audio_G729IPP_Decoder
1601245:BP6XSV7JQZ92Q70HQQ0A
1601246-SJ Labs GSM 6.10 CODEC
1601247-Audio_GSM610FR_Encoder
1601248-Audio_GSM610FR_Decoder
1601249-SIP.SuperTransaction
1601250:BP6XSV7JQZ92Q70HQQ0A
1601251-SIP.SuperTransaction
1601252-OnHandsetCustomEvent
--
1602883-ProgressContacts0002
1602884-ProgressContacts0001
1602885:BP6XSV7JQZ92Q70HQQ0A
1602886-DisabledOn
1602887-MD5
--
1604052-ProgressCalls0003
1604053-sip:talk4free.com
1604054:BP6XSV7JQZ92Q70HQQ0A
1604055-ProgressContacts0002
1604056-ProgressContacts0002
--
1604148-71b575e-co13152-INS014
1604149-ProgressContacts0001
1604150:BP6XSV7JQZ92Q70HQQ0A
1604151-080
1604152-ProgressContacts0002

kawikaratekid · Post by **kawikaratekid** » Sat May 01, 2010 1:22 am

Thanks Neo...I tried to search for what you told me to but nothing came up. So I'm going to have a closer look at the dumps after the weekend and see what I can find.....

neo2121 · Post by **neo2121** » Sat May 01, 2010 6:18 am

size is super important too if they aren't close to these sizes you might have your timing off

XP 12 - 15

vista 16 - 20

windows 7 22 - 26

kawikaratekid · Post by **kawikaratekid** » Sat May 01, 2010 12:02 pm

Thanks Neo! It took me a couple of hours last night and I found it. I used the info you had for Siphon in the other thread an now my iPhone is hooked up to magic jack! Thanks a lot.

mooty · Post by **mooty** » Sun May 09, 2010 7:39 am

neo2121 wrote:size is super important too if they aren't close to these sizes you might have your timing off

XP 12 - 15

vista 16 - 20

windows 7 22 - 26

Do you mean password length? If so, I thought it was fixed at 20 characters. I'm running XP and having a terrible time finding the info.

EDIT: found it!

neo2121 · Post by **neo2121** » Sun May 09, 2010 12:29 pm

I was referring to file size

taweekly · Post by **taweekly** » Thu May 13, 2010 10:35 am

neo2121,
I sent you an email about you magicjack hacking service.

Jarun · Post by **Jarun** » Sat May 22, 2010 8:45 pm

I think the problem I am having is I have no idea what I'm looking for. Can you give an example of what the username and passworld looks like?

And here is something you may or may not know or find interesting.
http://www.google.com/support/forum/p/v ... 5d20&hl=en

zmaddmattz · Post by **zmaddmattz** » Mon Jul 12, 2010 9:00 pm

I have been analysing and reverse engineering the mj software and dongle for over a year now. the only thing I have seen them update is the software that is critical of hiding the sip info from the end-user and also the software that detects wether the dongle is present. lol oh yea and the transmission of ads. if anyone could prove me wrong I would love to believe MJ is working towards better more stable software and service. fact is after 6 months of not using or RE'ing the software I can't even do a memory dump with a simple PEdump like program and find the sip pass. although I dident try as hard as I normally would in this scenerio. I used to beable to diasble internet boot mj and dump and in less then 2 min have all sip info.

Oh i forgot to mention the ROOTKIT like features they added. invisible drives letters and paths. just do a memory dump and you will find references to drives that don't exsist all the while the two drives that do exsist claim to be empty. they are using the same tactics that virus and worm creators use. no legitimate company runs software under cloak and dagger. even major software companys just encrypt there software openly knowing its just a matter of time before someone cracks it. but to make your software into a root kit to do good only knows what??? luckly I only run the mj on ramdisks never harddrive or flash memory or anything perminant. so the only thing they can realy do is update the dongle. but as soon as i get a scrap computer together I will see what this beast really does. lasttime I did i found 8-bit reg keys in xp that won't show up in 99.9% of commercial and private registry software. blah blah I'l keep u posted. sorry bout all typos the girlfriend spilled pop on my keyboard and i refuse to fix any words. lol later.

"I used to work for them. Besides them being crooks in regards to employees, they are hardcore about keeping people from using anything but their dongle/softphone to connect to the network. I personally wrote the code that detects the sip device type and boots you if you do not connect using a MJ softphone. Eventually they are going to look up what numbers you call and then display ads if you call certain numbers. There was also a discussion about using customer call records to identify who you are calling and then sell that information to new advertising customers. Having worked for them and then having them steal money from me, I am not all that thrilled with them"

http://www.google.com/support/forum/p/v ... 5d20&hl=en

gomike78 · Post by **gomike78** » Sun Jul 18, 2010 9:09 pm

Any working links to download the software?

neo2121 · Post by **neo2121** » Sun Jul 18, 2010 10:09 pm

this? http://magicjackhacks.net/downloads/Mag ... eswsip.zip

goliath6900 · Post by **goliath6900** » Thu Aug 05, 2010 8:46 am

i cant access this link http://magicjackhacks.net/downloads/Mag ... eswsip.zip. anybody know what's wrong? or any link where i can dl the software to get the password? thanks

neo2121 · Post by **neo2121** » Fri Aug 06, 2010 6:54 pm

in the middle of a server move and some how the domain got pointed at the wrong name server should be good in a few min thanks for pointing this out.

might take a little longer kind of busy low on the list of stuff to fix sorry.

Links should be working now

goliath6900 · Post by **goliath6900** » Mon Aug 09, 2010 11:35 pm

hi neao2121, tried it and its still down.

neo2121 · Post by **neo2121** » Tue Aug 10, 2010 3:23 pm

http://magicjackhacks.net/downloads/Mag ... eswsip.zip
For some reason the link that you were clicking on had a . at the end of it so the direct link wasn't working but the site is working. If that new link doesn't work then you need to clean your browser history and cookies and try again.

goliath6900 · Post by **goliath6900** » Thu Aug 12, 2010 3:00 am

link is working now. thank you very much

maa · Post by **maa** » Wed Sep 01, 2010 10:12 am

BooDaddy wrote:Thanks!
I have posted the file on my server. Heres the address:

http://ftfw.net/files/mj/AutoMagicJack.rar

If there are any other files that need hosting just let me know, and I will put them up.

It says the version of the windows (Win7 home premium x64) I am running is not compatible with this software? Could someone post a working link (Stroths MagicJack Utilities Suite v1.6) of the OP version. TIA

arcadia2uk · Post by **arcadia2uk** » Wed Sep 01, 2010 12:45 pm

Well, until a new solution is found it's sort of a moot point.

sabresfan wrote:Recent problem with ata users http://www.phoneservicesupport.com/do-n ... t9603.html There's no known cure for this yet.

bpbooher · Post by **bpbooher** » Thu Sep 02, 2010 4:43 pm

Use wireshark to monitor network traffic in the filter box type sip and apply. Make a phone call with magic jack on the network you are monitoring. SIP packages will show up in wireshark. Let call connect, then hang up. select top sip package in wireshark, right click and select follow udp string, look for password there. after done at the top of wireshark click telephony and select VoIP calls. it will show the calls that have been made will show your username, and the domain name that they connected to.

neo2121 · Post by **neo2121** » Thu Sep 02, 2010 11:07 pm

bpbooher wrote:Use wireshark to monitor network traffic in the filter box type sip and apply. Make a phone call with magic jack on the network you are monitoring. SIP packages will show up in wireshark. Let call connect, then hang up. select top sip package in wireshark, right click and select follow udp string, look for password there. after done at the top of wireshark click telephony and select VoIP calls. it will show the calls that have been made will show your username, and the domain name that they connected to.

Not sure where you are finding the password in wireshark captures

m4f1050 · Post by **m4f1050** » Thu Sep 09, 2010 12:37 am

I have a PBX I want to use my MJ with, is there an updated utility to get the username and password?

Thanks!

neo2121 · Post by **neo2121** » Thu Sep 09, 2010 10:10 am

There is a pearl script that will pull the I think it still works. This method still works

netcat · Post by **netcat** » Thu Sep 09, 2010 11:13 am

Same boat I dont see the password within the Wireshark Capture.

regarding the Pearl Script.

where do we find such animal ??

any other methods that still work, am I correct in assuming SIPCAPTURE no longer works?

have done it succesfully a year ago, now no longer appears to display the password

thanks

arcadia2uk · Post by **arcadia2uk** » Thu Sep 09, 2010 12:32 pm

netcat wrote:...regarding the Pearl Script.

where do we find such animal ??...

It's called mjsip
http://www.phoneservicesupport.com/mjsi ... t9176.html
But, I think this, magicsipac, work just as well, and is more user friendly:)
http://www.phoneservicesupport.com/magi ... t9187.html
However, as it have been stated in a all too many threads; since the latest "Lucky You" there might still be some issues to find the sip info and to get it to work.

m4f1050 · Post by **m4f1050** » Wed Sep 15, 2010 11:18 pm

Ok, so I got my password, and ran MJMD5 and set it up... When I try to dial I get a recording of some dude saing the test call was successful, but it doesn't dial out the number I tried to dial. Did I just get my magicjack hacked? This doesn't add up... Anybody care to explain?

Thanks.

cmac0351 · Post by **cmac0351** » Sat Oct 30, 2010 11:51 am

I am getting the ivalid drive letter error trying to get sip info. There is no drive that shows up for my magicjack, and i have through "My Computer, Manage..." but it doesn't show up (Windows 7).

How can I find my drive letter?

jack-N-D-Trash · Post by **jack-N-D-Trash** » Sun Nov 28, 2010 4:08 am

I think mj changed our password once then that's it.. because i got the same password no matter how many times i dumped it.. then they probably revised the connection procedure.. just my 50 cents..

jeremyc · Post by **jeremyc** » Thu Dec 16, 2010 10:49 pm

all the download links are dead does anyone have a copy they can share?

gashliquor · Post by **gashliquor** » Thu Dec 16, 2010 10:55 pm

jeremyc wrote:all the download links are dead does anyone have a copy they can share?

Even if you got a copy, It's worthless

jeremyc · Post by **jeremyc** » Thu Dec 16, 2010 11:54 pm

all i need it to do is start and stop the MJ i am wanting to change the voicemail so it doesnt pick up

but i did get a copy of it but it wont work on my 64bit computer

neo2121 · Post by **neo2121** » Fri Dec 17, 2010 10:02 am

you can get it from my site magicjackhacks.net in the download section you can still pull your password using the SIPdump tool only. It just basiclly a tool the runs PMdum then runs the file through scripts. But the other crap wont work might have to buy one of the other tools for sale in the for sale forum.

ruggb · Post by **ruggb** » Sun Dec 19, 2010 9:51 am

been trying to get pw - no luck.
SIPDUMP APPEARS TO RUN JUST FINE, BUT I can;t find anything that resembles a password near / around any words associated with proxy or password.

Is this process dead now? - I am trying to get this off my computer onto a linksys 2102 ATA.

neo2121 · Post by **neo2121** » Sun Dec 19, 2010 11:56 am

you can still get the password by just using PM dump. But the password wont do you any good because ethey have changed the auth process again

ruggb · Post by **ruggb** » Sun Dec 19, 2010 1:14 pm

So - It is no longer possible to make this work with an ATA?
Is that correct?
I guess for the extra $0.03 / day I will opt for a netTalk unit to avoid this popup.
relegate the MJ for travel only till my lease expires.

jeremyc · Post by **jeremyc** » Sun Dec 19, 2010 1:31 pm

I'm glad you said something about nettalk cuz ive never heard of them before and when my MJ is up i will probably go with them as well cuz i hate this popup as well and i hate leaving my computer on 24/7 and MJ says you can do 3 way calling yeah its not really 3 way calling its more like joining 2 calls you cant call the 3rd person they have to call you plus nettalk has the smartphone app which i think is awesome also do you know if you can disable nettalk voicemail so you can use your home answering machine or is it forced upon you like MJ?

Post by **laserjobs** » Sun Dec 19, 2010 2:18 pm

jeremyc wrote:I'm glad you said something about nettalk cuz ive never heard of them before and when my MJ is up i will probably go with them as well cuz i hate this popup as well and i hate leaving my computer on 24/7 and MJ says you can do 3 way calling yeah its not really 3 way calling its more like joining 2 calls you cant call the 3rd person they have to call you plus nettalk has the smartphone app which i think is awesome also do you know if you can disable nettalk voicemail so you can use your home answering machine or is it forced upon you like MJ?

You can disable voicemail on NetTALK in their control panel

jeremyc · Post by **jeremyc** » Sun Dec 19, 2010 3:35 pm

laserjobs wrote:
jeremyc wrote:I'm glad you said something about nettalk cuz ive never heard of them before and when my MJ is up i will probably go with them as well cuz i hate this popup as well and i hate leaving my computer on 24/7 and MJ says you can do 3 way calling yeah its not really 3 way calling its more like joining 2 calls you cant call the 3rd person they have to call you plus nettalk has the smartphone app which i think is awesome also do you know if you can disable nettalk voicemail so you can use your home answering machine or is it forced upon you like MJ?
You can disable voicemail on NetTALK in their control panel

nice i will get rid of MJ then

shneior7 · Post by **shneior7** » Fri Mar 11, 2011 10:01 am

MagicDump wrote:Hi Stroths, nice touch on the integration, excellent, it upgraded my software and pull my SIP info without a problem.

I am running on Vista X32.

This are my settings:
[Settings]
ServiceMode=No
ThinClient=No
StartDelay=3
MJFlashDriveLetter = J

[MJServiceMode]
Path1 = C:\users\Default\AppData\Roaming
Path2 = C:\Users\Steven\AppData\Roaming
MJService = magicjack

[MJNONServiceMode]
Path3 = C:\Users\Dragon\AppData\Roaming\

Thank you

oldtimercurt · Post by **oldtimercurt** » Fri Mar 11, 2011 1:29 pm

Don't waste your time. Using MJ SIP info when you can get it is just about mission impossible. Most have given up on it and are using MJ as intended or gone to other VoIP providers. Read some of the many posts on the board dealing with this.

OTC

german-ukr · Post by **german-ukr** » Tue Mar 29, 2011 4:15 am

How to find password. I used this words for find (CTRL+F) in notepad:

SIP.Connection.Refresh
ProxyUserName
ProxyUserPassword
SIPProxyURI
E<your_phone>01

I wasted 2 evenings and have 2 passwords.

german-ukr · Post by **german-ukr** » Tue Mar 29, 2011 4:27 am

Hello, I'm a new one. I got from magicjack login,password and proxy, and use it with MGMD5 and Xlite 3.0 software without jack. I got all above from two jacks, but I'm not shure that settings and password are correct. X-lite says 401 and 408 errors: request timeout and registration failed. Please help.

neo2121 · Post by **neo2121** » Tue Mar 29, 2011 8:41 am

if you would have only looked a few post up from yours you would have noted that this is no longer working. magicjack has changed the authentication Process meaning we need a new MJMD5 been like this for well over a year.....

SOMEONE FOR THE LOVE OF GOD LOCK THIS POST!!!!!

or not.

bitstopjoe · Post by **bitstopjoe** » Tue Mar 29, 2011 8:50 am

WHAT??? Read??? Search??? Surely you jest............. And I know, don't call me Shirley

Common sense is dead.. Don't you know that? I think it died last election!!

german-ukr · Post by **german-ukr** » Tue Mar 29, 2011 5:22 pm

neo2121 wrote:if you would have only looked a few post up from yours you would have noted that this is no longer working. magicjack has changed the authentication Process meaning we need a new MJMD5 been like this for well over a year.....

SOMEONE FOR THE LOVE OF GOD LOCK THIS POST!!!!! or not.

Thank you for this information again, what is the better way to use X-lite or same software?

Kif Kroker · Post by **Kif Kroker** » Tue Mar 29, 2011 5:38 pm

german-ukr wrote:
neo2121 wrote:if you would have only looked a few post up from yours you would have noted that this is no longer working. magicjack has changed the authentication Process meaning we need a new MJMD5 been like this for well over a year.....

SOMEONE FOR THE LOVE OF GOD LOCK THIS POST!!!!! or not.
Thank you for this information again, what is the better way to use X-lite or same software?

You cannot use mJ without their software and their dongle currently. Their last major update put an end to using your own device or a standard softphone.

Dave

german-ukr · Post by **german-ukr** » Tue Mar 29, 2011 5:40 pm

Kif Kroker wrote:
german-ukr wrote:
neo2121 wrote:if you would have only looked a few post up from yours you would have noted that this is no longer working. magicjack has changed the authentication Process meaning we need a new MJMD5 been like this for well over a year.....

SOMEONE FOR THE LOVE OF GOD LOCK THIS POST!!!!! or not.
Thank you for this information again, what is the better way to use X-lite or same software?
You cannot use mJ without their software and their dongle currently. Their last major update put an end to using your own device or a standard softphone.

Dave

Can I use magickjack without dongle? http://www.phoneservicesupport.com/easy ... t2640.html Sorry for stupid question again.

magicJack and magicJack Plus Support, Reviews, FAQs and Tricks

Stroths MJ Utilities 1.6 -SIP Info & More 8/2 UPDATE

Hack supporrt

:\

wireshark

Re: wireshark

SIP Password extraction

Re: SIP Password extraction

MJMD5

hi, no succeed. "no sip info found" why is it?