Need updated TC guide

Discuss magicJack running on Thin Clients

Moderators: Bill Smith, Pilot

Post Reply
goatgonads
MagicJack Newbie
Posts: 9
Joined: Mon May 25, 2009 9:51 am

Need updated TC guide

Post by goatgonads »

After months of research here, I purchased a tc listed as a T5710, 800mhz 256/256, updated it with a 2GB transcend and 512 Ram. I tried every guide here, and I cannot get it to boot. Neither of Stroths images worked, jeepsters guide got me up to the xp boot screen, but locked up indefinelty on the XP loading screen. I have tried sp36064, sp29705, and SP38266 HP images. Holman, Stroth, HELP!!
lymon
Dan isn't smart enough to hire me
Posts: 164
Joined: Sat May 31, 2008 6:47 pm

Re: Need updated TC guide

Post by lymon »

goatgonads wrote:After months of research here, I purchased a tc listed as a T5710, 800mhz 256/256, updated it with a 2GB transcend and 512 Ram. I tried every guide here, and I cannot get it to boot. Neither of Stroths images worked, jeepsters guide got me up to the xp boot screen, but locked up indefinelty on the XP loading screen. I have tried sp36064, sp29705, and SP38266 HP images. Holman, Stroth, HELP!!
Does it work (load xpe) with the originally configured DOM and ram? Sometimes times the stupid things are really sketchy about the brand of ram that they will accept, including not liking some of the recommended chips. Just a thought.
goatgonads
MagicJack Newbie
Posts: 9
Joined: Mon May 25, 2009 9:51 am

Post by goatgonads »

It worked with the original DOM and ram. I ordered the recommended 512Mb ram, it worked with that. Next I ordered the 2G transcend DOM that was recommended. Now, I cannot get the new DOM flashed.

I had hoped to load stroth's v1.2, it seems to load, i am prompted for a power cycle, i change the bios back to ATA boot from USB, and I get a non system disk error.
Post Reply