Magicjack down today 8AM CST

Having issues with your magicJack? Post here, and we'll try to help you out!

Moderators: Bill Smith, Pilot

Post Reply
kingfisher1111
MagicJack Expert
Posts: 76
Joined: Tue Nov 27, 2007 6:17 pm

Magicjack down today 8AM CST

Post by kingfisher1111 »

Hey ,
I powered on my system and my MJ is not working.
Anyone facing the same problem.

Any upgrades going?
Thanks
Last edited by kingfisher1111 on Tue Mar 11, 2008 3:54 pm, edited 1 time in total.
Xen1969
MagicJack Expert
Posts: 83
Joined: Thu Nov 22, 2007 12:18 pm
Location: Chicago

Post by Xen1969 »

My MagicJack is working (630). Can you describe "not working" ?
gooney
Dan isn't smart enough to hire me
Posts: 382
Joined: Sat Feb 09, 2008 5:38 pm
Location: Salt Lake City, Utah

Post by gooney »

is your MJ still down? mine is working.
Chat with me LIVE!!! :arrow:
Image
gooney - Salt lake City, UT (801)
Don't mind me grammar cuzz it sukks!!
kingfisher1111
MagicJack Expert
Posts: 76
Joined: Tue Nov 27, 2007 6:17 pm

Post by kingfisher1111 »

Yes it is still down.. :? :roll:
dbarber
MagicJack Contributor
Posts: 58
Joined: Tue Nov 27, 2007 8:19 pm
Location: West Chester, PA

Post by dbarber »

Been working here all morning in 610. You aren't running the Caller ID spoofer or anything like that are you? You haven't tried to lock yourself to a certain proxy?
Hope it's working by now.

Donn
MagicJack on Dell Inspiron 8200 laptop running WinXP Pro with SP2

These opinions are strictly my own. However, if you really want them, we can negotiate.
Derby
MagicJack Newbie
Posts: 2
Joined: Sat Feb 09, 2008 11:08 am

Post by Derby »

mj down late last night and didn't start working here until about 2 pm 3-11-08
HolmanGT
MagicJack Sensei
Posts: 1127
Joined: Tue Jan 08, 2008 7:13 am
Location: Saint George, UT

Post by HolmanGT »

Mine is up ! - Magic Jack that is.
- George -

HolmanGT - St. George, UT MJ-Area/Prefix 435-275
ooma-Area/Prefix 435-579
Baja Broadband, up-1mb dn-10mb, on days with a good tail wind.
MJ on HP T5730 2GBF/2GBR Thin Client XPe SP2 Router Dlink Dir-655
kumar
Dan Should Pay Me
Posts: 806
Joined: Thu Nov 15, 2007 4:29 pm
Contact:

Post by kumar »

dbarber wrote:Been working here all morning in 610. You aren't running the Caller ID spoofer or anything like that are you? You haven't tried to lock yourself to a certain proxy?
Hope it's working by now.

Donn
Did you notice that 610 and 215 area codes have not been down for a while?
Peace
Kumar
Will not be on forum until after June 15th.
kingfisher1111
MagicJack Expert
Posts: 76
Joined: Tue Nov 27, 2007 6:17 pm

Post by kingfisher1111 »

I figured out the reason why it was down..
from last mid night there was internet outage in my area which I am unaware.i was posting these messages from work place
Sorry to trouble you all :D
Thanks
gooney
Dan isn't smart enough to hire me
Posts: 382
Joined: Sat Feb 09, 2008 5:38 pm
Location: Salt Lake City, Utah

Re: Magicjack down today 8AM CST

Post by gooney »

kingfisher1111 wrote:Hey ,
I powered on my system and my MJ is not working.
Anyone facing the same problem.
My internet is working fine..
Any upgrades going?
Thanks
hmmmm? lol just messing with you :wink:
Chat with me LIVE!!! :arrow:
Image
gooney - Salt lake City, UT (801)
Don't mind me grammar cuzz it sukks!!
dbarber
MagicJack Contributor
Posts: 58
Joined: Tue Nov 27, 2007 8:19 pm
Location: West Chester, PA

Post by dbarber »

kumar wrote: Did you notice that 610 and 215 area codes have not been down for a while?
Peace
Kumar
I'm quite happy about that. I guess clean living does have its rewards! :)

Donn
MagicJack on Dell Inspiron 8200 laptop running WinXP Pro with SP2

These opinions are strictly my own. However, if you really want them, we can negotiate.
curiousgeorge
Dan isn't smart enough to hire me
Posts: 193
Joined: Wed Jan 23, 2008 5:55 pm
Location: California

Post by curiousgeorge »

Thanks kingfisher for the update,glad its working for you again,peace out
help! I am running out of USB ports!!!!!!!!
Tell me, Mr. Anderson... what good is a phone call... if you're unable to speak?
kumar
Dan Should Pay Me
Posts: 806
Joined: Thu Nov 15, 2007 4:29 pm
Contact:

Post by kumar »

dbarber wrote:
kumar wrote: Did you notice that 610 and 215 area codes have not been down for a while?
Peace
Kumar
I'm quite happy about that. I guess clean living does have its rewards! :)

Donn
Hahah... maybe we are the only people with philly area area codes.
Peace
Kumar
Will not be on forum until after June 15th.
saxman
Dan isn't smart enough to hire me
Posts: 395
Joined: Mon Feb 25, 2008 1:35 pm

Post by saxman »

The help section says it's moved and not available-I asked tech support-said they were working on lots of new changes right now-also when I tried to access my voicemail I could not get through-it kept hanging up-must be those techies at work again-
GuyOnTheAir
Dan isn't smart enough to hire me
Posts: 328
Joined: Mon Feb 11, 2008 4:44 pm
Location: Greater Los Angeles, CA
Contact:

Post by GuyOnTheAir »

Still down in Southern California.

And, if you try to go to Tech Chat, you get this:
Important!!....We have been informed that at least one of the major internet providers is having outages. This will unfortunately affect magicJack registration. Please do not register your magicJack until this is resolved. Depending on your location, you may experience difficulty in receiving or placing calls. We will be updating our customers in this space when the issue is resolved. Tech chat will return as soon as this issue is resolved. Thank you for your patience.
Also, magicFix reports it is unable to connect to the magicJack servers.
chihuahuas
magicJack Apprentice
Posts: 10
Joined: Thu Feb 28, 2008 1:26 pm

On Stlouis not working

Post by chihuahuas »

MJ DOWN time 2:00 est

I'm going through St Louis and no connections. Spoof off host file clean.. I'll try spoof back to nashville see what happens
10Gauge
MagicJack Newbie
Posts: 4
Joined: Thu Jan 10, 2008 5:35 am

Post by 10Gauge »

I am down too - 630 number Elgin, IL
No inbound - no outbound (just a fake fast busy or just dead air)
noted the 'internet disturbances message on Magicjack.com but there is NOTHING
about that on any of the Internet traffic or Broadband reports so I think its just
Magicjack saying that when it's internal to them - FWIW&IMHO
Stewart
Dan Should Pay Me
Posts: 663
Joined: Tue Nov 13, 2007 2:58 pm

Post by Stewart »

It appears that many users have been moved to St. Louis proxy. Distributing the load is a good thing, but the migration does not seem to have gone well. I've been tracking traffic on the MJ routers for a while -- here is a recent capture from Nashville (Internet port, times are PDT):
Image
Image
As you can see, some major perturbations at ~9AM and ~10AM; we now seem to be completely down.
(The completely flat areas are caused by my MRTG mysteriously stalling; I believe that the data is otherwise accurate)
Last edited by Stewart on Wed Mar 12, 2008 3:03 pm, edited 1 time in total.
HolmanGT
MagicJack Sensei
Posts: 1127
Joined: Tue Jan 08, 2008 7:13 am
Location: Saint George, UT

Post by HolmanGT »

Down here also
- George -

HolmanGT - St. George, UT MJ-Area/Prefix 435-275
ooma-Area/Prefix 435-579
Baja Broadband, up-1mb dn-10mb, on days with a good tail wind.
MJ on HP T5730 2GBF/2GBR Thin Client XPe SP2 Router Dlink Dir-655
MagiclyJackedUp
MagicJack Newbie
Posts: 8
Joined: Sat Jan 12, 2008 1:31 pm

outtage

Post by MagiclyJackedUp »

Seems like my magic jack is temporarily out. I am in Southern California with a (310) area code. Although the desktop MagicJack window states "ready to call", any call placed gets two busy tones and then silence. Thanks for all the notices, and I will keep my fingers crossed.
Rubberchicken
MagicJack User
Posts: 37
Joined: Tue Jan 15, 2008 1:27 pm

Post by Rubberchicken »

mine is now working again about damm time
HighG
MagicJack Newbie
Posts: 4
Joined: Fri Dec 21, 2007 10:46 pm

Post by HighG »

MJ is down for me too and has been all day. Just about 3 PM CT over here using a 952 area code.
Rubberchicken
MagicJack User
Posts: 37
Joined: Tue Jan 15, 2008 1:27 pm

Post by Rubberchicken »

mine is working area code (573) i just made a couple calls so maybe there on the way back
curiousgeorge
Dan isn't smart enough to hire me
Posts: 193
Joined: Wed Jan 23, 2008 5:55 pm
Location: California

Post by curiousgeorge »

I tested my MJ by calling my cell phone I could not hear the ringing on my MJ but my cell phone was ringing,only silent air was heard on my MJ phone,I will try later and see if it is resolved.Area code 951 California.
help! I am running out of USB ports!!!!!!!!
Tell me, Mr. Anderson... what good is a phone call... if you're unable to speak?
gooney
Dan isn't smart enough to hire me
Posts: 382
Joined: Sat Feb 09, 2008 5:38 pm
Location: Salt Lake City, Utah

Post by gooney »

mine is working again :wink:
Chat with me LIVE!!! :arrow:
Image
gooney - Salt lake City, UT (801)
Don't mind me grammar cuzz it sukks!!
magicJackinKaye
MagicJack Newbie
Posts: 2
Joined: Fri Mar 14, 2008 1:57 am

mines was down for the last two days but back now

Post by magicJackinKaye »

kumar wrote:
dbarber wrote:
kumar wrote: Did you notice that 610 and 215 area codes have not been down for a while?
Peace
Kumar
I'm quite happy about that. I guess clean living does have its rewards! :)

Donn
Hahah... maybe we are the only people with philly area area codes.
Peace
Kumar
i have 215 too... but mines was down for the last two days but it's back on now!!!i have Comcast High Speed Cable Connection what connection are you using that yours didn't go down???
phemius
MagicJack Newbie
Posts: 3
Joined: Thu Mar 13, 2008 12:09 pm

Post by phemius »

mine is still out (412) i just called tech support and they told me to wait awhile longer. i asked if i could release my number and get one in an area that works since i use grand central anyway and was told no. so are the people switching using a new box or is there a way?

at least the first day i knew people were working on it when it was on the splash screen.
msiam
Dan isn't smart enough to hire me
Posts: 474
Joined: Thu Nov 15, 2007 2:42 pm
Location: WI

Post by msiam »

Its like that everywhere.. One time you can complete a call the next try, the "All circuits Are BZ Now" message comes on. Its hit and miss till the which ever isp is down, gets back up all the way.. so.. those guys may think they are 100%, but I doubt it..I get a dial tone, and I call my cell.. it works, I hang up and try another number, I get either dead air, or the recording circuits are BZ.. Just hang in there man.. we'll be back and grinnin :D soon (hate to use that word, "soon" MJ users hate that word).
ImageImage
tosaid
magicJack Apprentice
Posts: 10
Joined: Wed Jan 30, 2008 1:06 pm

Post by tosaid »

incoming and outgoing calls here are hit and miss area code (224).
magicJackinKaye
MagicJack Newbie
Posts: 2
Joined: Fri Mar 14, 2008 1:57 am

Post by magicJackinKaye »

msiam wrote:Its like that everywhere.. One time you can complete a call the next try, the "All circuits Are BZ Now" message comes on. Its hit and miss till the which ever isp is down, gets back up all the way.. so.. those guys may think they are 100%, but I doubt it..I get a dial tone, and I call my cell.. it works, I hang up and try another number, I get either dead air, or the recording circuits are BZ.. Just hang in there man.. we'll be back and grinnin :D soon (hate to use that word, "soon" MJ users hate that word).

That exactly what mine is doing... :roll:
n3glv
MagicJack Newbie
Posts: 4
Joined: Fri Apr 04, 2008 4:07 am
Contact:

Huge Outage?

Post by n3glv »

Inbound DID's are screwed, at least in the Northeast usa and canada.
Chatted via online "24 hr support" and got promised that tier-2 support would
e-mail me "soon". It's now 13+hrs, no e-mail. No DID, no forwards.
This is confirmed with 3 MJ's through Pittsburgh and one in Toronto Canada, urlhasbeenblocked
customer.
Either "24 hour tech support" means that it takes that long for them to get back to you.
or
They have vastly over-sold their capacity. (We can only guess wich.)
Btw, while talking to them each of us asked a basic turing test for AI (trying to determine
if talking to a BOT) "What is 2 plus 2?" No response. So, where's the callcenter? India?
Pakistan? etc? (If we can find out, we could use the insult monger to generate some nasty
bits for them to read!!) <wink>
We will probablly be posting to slashdot and or dslreports today. Film at 11..
SDuB757
MagicJack Newbie
Posts: 2
Joined: Wed Apr 09, 2008 10:09 am

MJ Down

Post by SDuB757 »

My MagicJack Is Working Fine. Besides The VOICEMAIL!!!! Other Than That No Problems In Area Code 718.
kumar
Dan Should Pay Me
Posts: 806
Joined: Thu Nov 15, 2007 4:29 pm
Contact:

Re: Huge Outage?

Post by kumar »

n3glv wrote:Inbound DID's are screwed, at least in the Northeast usa and canada.
Chatted via online "24 hr support" and got promised that tier-2 support would
e-mail me "soon". It's now 13+hrs, no e-mail. No DID, no forwards.
This is confirmed with 3 MJ's through Pittsburgh and one in Toronto Canada, urlhasbeenblocked
customer.
Either "24 hour tech support" means that it takes that long for them to get back to you.
or
They have vastly over-sold their capacity. (We can only guess wich.)
Btw, while talking to them each of us asked a basic turing test for AI (trying to determine
if talking to a BOT) "What is 2 plus 2?" No response. So, where's the callcenter? India?
Pakistan? etc? (If we can find out, we could use the insult monger to generate some nasty
bits for them to read!!) <wink>
We will probablly be posting to slashdot and or dslreports today. Film at 11..
Hmm.. does yours go right to the voicemail? That is what my problem is over here. I chat with magicjack people every weekend and they just "refresh the account" and leave. If anyone knows how to fix this....Please post!
Peace
Kumar
User avatar
gary
Dan isn't smart enough to hire me
Posts: 130
Joined: Tue Nov 27, 2007 12:59 pm

Post by gary »

Voicemail is working again and so is the VMAIL button on the softphone. Area code 202.
XP/SP3 Media Center
Cable
vjdave
MagicJack Newbie
Posts: 2
Joined: Wed Apr 09, 2008 4:13 pm

Post by vjdave »

Voicemail is working if someone calls from the outside. I have had the dreaded "Error 400 - Waiting for proxy registration" error all day and I feel Im screwed :(
Post Reply