Need to run upgrade.exe every time computer is restarted

[Fieroguy]

I have an older system; IBM ThinkCentre, Pentium4, WinXP. Uninstalled Nero and IBM DLA and ran CCleaner to get magicJack to work. Would only start after running upgrade.exe. When the computer is restarted, magicJack will not start unless I run upgrade.exe. Every time!
Any ideas what might be going on, or what I should look for? It would be nice if magicJack would restart automatically without the 'hoop jump'.

Thanks.

[Magicjacktechsupport]

Please try the following steps for your issue .

1.Click on start and press R key to get run window . Type devmgmt.msc there and press Enter.
2.Now click on + sign next to Universal Serial Bus Controllers
3.Please right click on first entry and select Update Driver
4.Harware setup wizard window will pop-up and there select " Yes, this time only " and click on Next
5.Now select "Install from a list or specific location(Advanced) " and click on Next
6.Then click on " Don't search. I will choose the drive to install " and click on Next
7.Now click on Next again and click on Finish to complete.

Please do the same thing with all entries you see under Universal Serial Bus Controllers

Under each USB root hub right click and pull up properties...Find the power management option and uncheck the box that says "Allow the computer to turn off this device to save power." Again make sure you do this for each of the USB root hubs listed.



After following the above steps you will not need to run the upgrade after rebooting your PC

[Magicjacktechsupport]

You can follow the given steps to add the magicjack in your bootup program .


Please go to control panel and double click on folder option
If in Classical mode, jump to step next step1. If in Category View, switch to Classical View
1 Double Click Folder Options
2 Click the View tab
3 Check View Hidden Files and Folders
4 Click Apply and OK


This will display the hidden files of your PC.

For Window XP :-
1. Now click on Start and select run . Type " application data "there and press enter key.
2. Double click on mjusbsp folder .
3. Double click on in0000 folder. Copy the file named setup and close that folder.
4. Click the Start button, click All Programs, right click the startup folder, and choose open all users and paste the setup file into that folder.


For Window Vista :

1. Now click on Start and select run . Type " appdata "there and press enter key.
2. Double click on Roaming folder first. Then double click on mjusbsp folder .
3. Double click on in0000 folder. Copy the file named setup and close that folder.
4. Click the Start button, click All Programs, right click the Startup folder, and choose open all users Paste the setup file into that folder.
5.Your magicJack will now start on bootup.


Merry Christmas