Help me with router D-Link DI-524

jpaiz · Post by **jpaiz** » Wed May 05, 2010 6:50 pm

I need to make work router D-Link DI-524 with MJ. I have open ports 5060 and 5070 of the same, inclusively I have placed the IP of the PC in DMZ, but it does not work. It only works when the PC is connected directly to cablemodem. I need guide to me, please

Nobody beats the Whiz! · Wed May 05, 2010 7:28 pm

jpaiz wrote:I need to make work router D-Link DI-524 with MJ. I have open ports 5060 and 5070 of the same, inclusively I have placed the IP of the PC in DMZ, but it does not work. It only works when the PC is connected directly to cablemodem. I need guide to me, please

I didn't need to do anything special for my DI-524 to work with my MJ.

I have Current Firmware Version: 1.23 on hardware version A1.

-Dynamic IP

DHCP Server Enabled
Starting IP Address 192 . 168 . 0 . 100
Ending IP Address 192 . 168 . 0 . 199
Lease Time 1 Week

Static DHCP Enabled, but none reserved

DMZ disabled

Time - Automatic
Custom NTP: 128.100.100.128

UPNP Settings
Enabled

Gaming Mode
Enabled

VPN Pass-Through
Allows VPN connections to work through the DI-524.
PPTP
Enabled
IPSec
Enabled

Multicast Streams
Enabled
WAN select to 10/100 Mbps
10/100Mbps Auto

Dynamic DNS
DDNS
Disabled

johnvan · Post by **johnvan** » Wed May 05, 2010 8:45 pm

Is your cable modem a router? If you're operating behind two routers you can configure your D-link as a wireless access point.

lymon · Post by **lymon** » Wed May 05, 2010 9:10 pm

jpaiz wrote:I need to make work router D-Link DI-524 with MJ. I have open ports 5060 and 5070 of the same, inclusively I have placed the IP of the PC in DMZ, but it does not work. It only works when the PC is connected directly to cablemodem. I need guide to me, please

My DI-524 also works fine with magicjack on a HP thin client without doing anything special to the router settings. Is your web browser able to access the internet from this same computer? There may be some addressing conflicts going on if you can't connect to the internet at all/

jpaiz · Post by **jpaiz** » Tue May 25, 2010 11:06 pm

I am using Cable-Modem Motorola Surfboard Modelo SB5101i. I do not understand so that it does not work altogether with router D-Link DI-524 when using Magic Jack.

jpaiz · Post by **jpaiz** » Mon Jun 07, 2010 12:40 am

Well, it seems that nobody can help me. There was no way to use MagicJack.

For your information I am using; router D-Link DI-524:

Current Firmware Version: 4.03
Firmware Date: Mon, 14 Aug 2006 and CABLE - MODEM MOTOROLA SurfBoard Modelo SB5101i

Thanks to you, bye

magicJack and magicJack Plus Support, Reviews, FAQs and Tricks