magicJack and magicJack Plus Support, Reviews, FAQs and Tricks

I have my MJ for almost 3 years. I have "heard" the duo does have its problems including sound quality. Using a T5720 1Ghz/1Gb/1GB with my MJ and it works perfectly. I have a T5720 setup overseas (Phlippines) since the power adapter is 110-240v and wifey talks to family hours on end. Save bigtime ...

Thanks.

Stryker

I have a T5720 with 1 GB flash drive but wanted to play around and adapt a Toshiba MK1504GAL 15Gb, 1.8" mini hard drive instead. This hard drive from an old ipod. Anybody have a tutorial on how to adapt this to the T5720 and what I should to the to the 1.8 mini hard drive to prepare it for T5720 ...

Just go to teamviewer.com and install the full free installation. Go from there and make sure you check for "personal" use and set it up to autostart everytime the computer reboots. That way you never need to hook up a monitor to see whats going on. Just teamviewer in from any other computer that ...

I have been seeing on ebay that some of the new thin clients such as T5720 can now be configured to automatically take the MJ updates without us to have to physically do it with mouse and keyboard. A way was found to.......

"get around the dreaded Write Filter feature of the XP Embedded on Thin ...

I have been seeing on ebay that some of the new thin clients such as T5720 can now be configured to automatically take the MJ updates without us to have to physically do it with mouse and keyboard. A way was found to.......

"get around the dreaded Write Filter feature of the XP Embedded on Thin ...

Actually for me its been great also. I will be hitting two years Dec 31st and have loved it so far. My only advice is to make sure you have the higher end thin client such as TC5720 1Ghz/1G/1G so that there are no issues. Clear sound and quality is great. Call Canada sometimes 2-3 times a day. Today ...

Or go buy another dongle and get a new number with that dongle and return your broken one back in the package. Maybe that will show MJ peeps the flaws in their thinking on ATA.

Stryker

Now this would be nice to have as a "cookie cutter" fix. As mentioned by the above author it is too advanced for the beginner such as myself. Would be really nice if someone with a clear understanding of this to put complete detailed fix for us to use. Thanks.

Stryker

hey

I have a WYSE 9150SE thin client
Product version: 3.04
with 512 flash and 256 ram
WinXpe v5.01 sp2
CPU 399 MHz
ramdisk set to 17mb

installed timeviewer on it to access it remote and then connected magicjack.. it loads fine but when i dial it will take 15min to dial a number if ever...

how ...

May I ask why this "worked better" than the PAP2 (assuming you had the PAP2 working before)? Doesn't the thin client need the MJ softphone software to work?

Which thin client are you using? What platform OS?

Finally, there were things I liked about the PAP2 (besides the low power and always on ...

Well, looks like no PAP2 fix so I went with Thin Client. Works better than PAP2. Too bad I didn't go that route first time.

Stryker1

I believe the reason is clearly security related. The magicJack dongle design is flawed by the fact one can pull the SIP credentials from it. I believe if magicJack could have fixed this security flaw that they would have done so already. Can you imagine the financial loss the company would take ...

It seems that those MJ that were on an ATA around the time of the "update" no longer work on an ATA, but those that were not hooked up thru an ATA are still working on an ATA. Like mine was not plugged in during the time of the update and both still work on an ATA and didn't require any "updates ...

This is really strange. I had my frineds SIP info from his MJ that he barely uses and inputted into line 2 of my WRP400 router and it worked fine with registering. I have not tried to make a phone call since I did this remotely from work. He has not taken the update. I am thinking that maybe the SIP ...

Stryker, would you care to share what your problem was and how you solved it? This could be beneficial to others in the same boat.

Thanks

OTC

Yeah, no problem. It turns out that under "Proxy and Registration" in Line 1 settings I can't use "proxy01.<city>.talk4free.com:5070" and had to use the ...

Okay, I figured my problem out. Got dial tone working and all is good. Thanks for all the help guys. Now I am gonna figure out how to get line 2 working on my voip.

Stryker

Stryker,
The only thing that's important are just a few settings under LINE 1, you shouldn't hafta change anything else on the router to get a dialtone. So, to start fresh, you're gonna need to do a hard reset on your phone router. If you aren't familiar with this, you just need to push a paperclip ...

Okay, I tried with my friends settings which worked for him. I unplugged everything and restarted and am still getting no connection. I am using Panasonic 2.4 Ghz wirelss phone. I am wondering if it might be the phone however in the "info" settings under "voice" this is what I get... http://i419 ...

Stryker,
Configure your router with the information we've given you or however your friend's router is configured. Once you're satisfied with the settings, unplug everything (including power) from your cable modem and your phone router. Connect your phone router's WAN port to your cable modem ...

If my memory serves me correctly WRTP54g is pretty much the same as the RTP300 just with the exception of WiFi.

If you need to activate "NAT Keep Alive" you will need to click on "Admin" then "advanced" display links first. Other than that everything should goes as follows:

<LINE 1>

NAT Keep ...

I figured I better start a new thread on my problem because it seems to me that my problem is not my settings but something else. I am able to use the MJ dongle with my computer no problem.....I can make and recieve calls. Now I wanted to use my voip routers instead of using the MJ dongle all the ...

Stryker,
Sorry I didn't get back to you sooner, I just got an e-mail that I had a message waiting here.

WRTP54G Firmware:
I modified v3.1.24 and v3.1.27 with instructions found on the Internet. Unmodified firmware will not install on hacked routers. I strongly recommend you modify your own because ...

Yeah...buy yourself a WRT400 and get rid of the problem...haha..Hey Stryker good to see you learning Bro...hit me up on MSN if you need help with the config.

LOL!!! Yeah, get the WRT400 as you say but still would be nice to get this WRPT54G going. Getting close though.

Stryker

Here is all the firmware:

http://oldwiki.openwrt.org/OpenWrtDocs(2f)Hardware(2f)Linksys(2f)WRTP54G.html

I tried to upgrade from my 3.1.17 and wasn't able to using the above links. Anyway, do I have to downgrade the software before I can upgrade to lets say 3.1.27 or the 5.1.04 firmware? Much ...

Ok, was able to get into the admin page using user "Admin" and leaving password blank and just hitting log in. Got to the webpage so I could upload the firmware 3.1.27 but it gave me an error code. I am looking for 3.1.24 if you happen to have a link for this firmware. Thanks.

Stryker

Kind of sounds like your VoIP router is still locked.

Thanks for the response. So if I can't get in with the default passwords then would this definitely mean that the router is locked? How else can tell if it is locked or unlocked other than the adminstration page lock out? Thanks.

Stryker

I have been having issues setting up my WRTP54G up. I can't seem to get on and have no dial tone and have followed the configuration page setup for PAP2 as suggested by mberland. How did you get your going Mr. Vile? I am just trying to figure out how to upgrade my firmware first to 3.1.24 first cuz ...

Try firmware 3.1.27. Here is the link:

http://vap.earthlink.net/upgrade/wrtp54g/wrt-11.1.1-3.1.27.img

Also, make sure your LINE 1 proxy has the ":5070" at the end:

proxy1.<city>.talk4free.com:5070

Thanks for the link on the s/w. I would definitelylike to upgrade it and that might solve my ...

Okay, I am a newbie with this but I have a magic jack and I pulled the SIP info off of it. I am running an UNLOCKED Linksys WRTP54G at firmware 3.1.17 which I bought off fleabay. Now I followed the link http://www.phoneservicesupport.com/magicjack-in-a-pap2t-configuration-pics-t5066.html
and did as ...