Xlite works with MJProxy.. Still no luck with "MTA 6328

magicJack Tips and Tricks

Moderators: Bill Smith, Pilot

Post Reply
cooldude929
MagicJack User
Posts: 37
Joined: Thu Jun 11, 2009 8:47 pm

Xlite works with MJProxy.. Still no luck with "MTA 6328

Post by cooldude929 »

Hello Gurus,

I have finally got MJProxy running and tested with Xlite, it worked great.

However, still no luck with ATA (Sunrocket Gizmo: MTA 6328-2Re).

=====
[42160] method='REGISTER' uri='sip:192.168.0.104'
[42160] qalloc(pak_send)=94
[42160] -----------------------------------------------
[42160] sendto(192.168.0.104:5070)=592=REGISTER sip:192.168.0.104 SIP/2.0 (468)
[42160]
REGISTER sip:192.168.0.104 SIP/2.0
v: SIP/2.0/UDP 192.168.0.103:5060;branch=z9hG4bKc0a800675060-4680;rport
f: sip:E**********[email protected];tag=C0A8006713C4-803FA3F01
t: sip:E**********[email protected]
i: [email protected]
CSeq: 468 REGISTER
User-Agent: InnoMedia SIP MTA6328-2Re v3.0.77
m: "E**********01"<sip:E**********[email protected]:5060>
Expires: 60
Authorization: Digest username="E**********01",realm="stratus.com",uri="sip:192.168.0.104",nonce="17fd89903_07276",algorithm=MD5,opaque="",response="031c1a84558797919d7a3e3a64f26e9a"
Max-Forwards: 70
l: 0


[42165]
[42165] -----------------------------------------------
[42220] -----------------------------------------------
[42220] recvfrom(192.168.0.104:5070)=455=SIP/2.0 401 Unauthorized
[42220]
SIP/2.0 401 Unauthorized
Via: SIP/2.0/UDP 192.168.0.103:5060;branch=z9hG4bKc0a800675060-4680;rport=5070;received=69.205.37.20
To: <sip:E**********[email protected]>
From: <sip:E**********[email protected]>;tag=C0A8006713C4-803FA3F01
Call-ID: [email protected]
CSeq: 468 REGISTER
User-Agent: ENSR2.5.48.1-IS15-RMRG0-RG900-EP1247262
WWW-Authenticate: Digest nonce="1041ec386_07283",realm="stratus.com",algorithm=MD5
Content-Length: 0


[42225] -----------------------------------------------
[42225] matched 401 response to request: REGISTER sip:192.168.0.104 SIP/2.0...(Cseq=468)
[42225] avoid 3rd and endless authentication
[42225 ch 0] ***my_state_machine: ch1, state=30 ***

[42225 ch 0]
***ch1: my_register() rsp->rcode:401***

[42225 ch 0] expire=60
[42225 ch 0] SIP_Proc::my_register reg_intv:7,enabled,rsp->rcode:401
[43910 ch 0] DSP_If: Got status (KEEP_ALIVE) from DSP 0x8c00
[43950 ch 1] DSP_If: Got status (KEEP_ALIVE) from DSP 0x8c00
NAT clean UDP, start at 0

NAT clean UDP, end at 0, 0 entry checked

[44000] NAT UDP clean 0 ticks 0 entry removed

[44000]
Nat_Scheduling_Proc:ticks:169021

[46210] qfree(803269B0)=95
[46310] qfree(803269B0)=96
[49220 ch 0]
update_local_signaling_port:ch:0 port:5060 no change!

[49220] UA[1]=E**********01 (re)REGISTERing to proxy[0]=sip:192.168.0.104:5070...
[49220] qalloc(pak_send)=95
[49220] -----------------------------------------------
[49220] sendto(192.168.0.104:5070)=408=REGISTER sip:192.168.0.104 SIP/2.0 (469)
[49220]
REGISTER sip:192.168.0.104 SIP/2.0
v: SIP/2.0/UDP 192.168.0.103:5060;branch=z9hG4bKc0a800675060-4690;rport
f: sip:E**********[email protected];tag=C0A8006713C4-803FA3F01
t: sip:E**********[email protected]
i: [email protected]
CSeq: 469 REGISTER
User-Agent: InnoMedia SIP MTA6328-2Re v3.0.77
m: "E**********01"<sip:E**********[email protected]:5060>
Expires: 60
Max-Forwards: 70
l: 0


[49220]
[49220] -----------------------------------------------
[49285] -----------------------------------------------
[49285] recvfrom(192.168.0.104:5070)=455=SIP/2.0 401 Unauthorized
[49285]
SIP/2.0 401 Unauthorized
Via: SIP/2.0/UDP 192.168.0.103:5060;branch=z9hG4bKc0a800675060-4690;rport=5070;received=69.205.37.20
To: <sip:E**********[email protected]>
From: <sip:E**********[email protected]>;tag=C0A8006713C4-803FA3F01
Call-ID: [email protected]
CSeq: 469 REGISTER
User-Agent: ENSR2.5.48.1-IS15-RMRG0-RG900-EP1247262
WWW-Authenticate: Digest nonce="38f129f66_07975",realm="stratus.com",algorithm=MD5
Content-Length: 0


[49285] -----------------------------------------------
[49285] matched 401 response to request: REGISTER sip:192.168.0.104 SIP/2.0...(Cseq=469)
[49285 ch 0] ***my_state_machine: ch1, state=20 ***

[49285 ch 0]
======

Configuration

MJProxy running on 192.168.0.104:5070

MTA6328-2Re Configuration:

SIP PROXY : sip:192.168.0.104:5070
Use Outbound Proxy: YES
SIP Local Signaling Por :5060
SIP Domain 192.168.0.104

Its not able to register. Still, Incoming works.

Any suggestion or comments would be highly appreciated.

Thanks
Top
cooldude929
MagicJack User
Posts: 37
Joined: Thu Jun 11, 2009 8:47 pm

Post by cooldude929 »

It first says 410 -Gone on Xlite too. When I connect again, it works on Xlite.
Top
az1324
Dan isn't smart enough to hire me
Posts: 100
Joined: Wed Feb 20, 2008 4:46 am

Post by az1324 »

That ATA doesn't send the CallID parameter so it won't work unless you handle the CallID separately in the proxy.
Top
cooldude929
MagicJack User
Posts: 37
Joined: Thu Jun 11, 2009 8:47 pm

Post by cooldude929 »

Yes, I have figured out that..

It sends the caller ID.. but with abbreviation, that is "i: "

v: SIP/2.0/UDP 192.168.0.103:5060;branch=z9hG4bKc0a800675060-2060;rport
f: sip:[email protected];tag=C0A8006713C4-803FA3F01
t: sip:[email protected]
i: [email protected]

f = From
t = To
i = Call-ID
v = Via

I have tried to fix the script. However, I couldn't get consistent nonces because this caller ID has got @ and . characters.

Need to work on the logic.. Any gurus might be helpful
Top
cooldude929
MagicJack User
Posts: 37
Joined: Thu Jun 11, 2009 8:47 pm

Post by cooldude929 »

Finally got it working.. Looks like its sending compact header (instead of full header). I have disabled the limit on header size. It started working.
Top
cooldude929
MagicJack User
Posts: 37
Joined: Thu Jun 11, 2009 8:47 pm

Post by cooldude929 »

both incoming and outgoing work, but outgoing calls get dropped after around 3min 25seconds..

Haven't test incoming calls yet.

Do we need to open any firewall ports for MJProxy to work well ?

Thanks
Top
synchron
Dan isn't smart enough to hire me
Posts: 230
Joined: Thu May 15, 2008 11:28 am

Post by synchron »

CoolDude:

I've had the MJMD5 running with the Innomedia ATA now for over a week - no problems. Incoming/Outgoing work with no dropped calls fine.

As far as your ATA settings:

MTA6328-2Re Configuration:

SIP PROXY : sip:192.168.0.104:5070
Use Outbound Proxy: YES
SIP Local Signaling Por :5060
SIP Domain 192.168.0.104

mine are slightly different and I suggest:

SIP PROXY : sip:192.168.0.104:5070
Use Outbound Proxy: NO (unchecked)
SIP Local Signaling Por :5070
SIP Domain 192.168.0.104:5070

Make Sure that your router (if you're using one) assigns the PC running MJMD5 '192.168.0.104' as a fixed static address, not dynamically in some IP address range. I also have my Registration interval set to 60 seconds if that helps.

Synchron 8)
Top
synchron
Dan isn't smart enough to hire me
Posts: 230
Joined: Thu May 15, 2008 11:28 am

Post by synchron »

Oops - sorry, with all your cross posts I now see that all this scripting mishmash you have posted is that you're trying to get this to work with DDWRT-MJMD5.

...Nevermind.....

Synchron 8)
Top
cooldude929
MagicJack User
Posts: 37
Joined: Thu Jun 11, 2009 8:47 pm

Post by cooldude929 »

Synchron,

You're awesome.. I have unchecked that "Outgoing proxy" and selected "729A".. It has been great so far.

What codecs do you use ?

By the way, you're using sunrocket firmware or got any other good firmware ? Sunrocket firmware sucks and very limited options.

Thanks a lot!!
Top
newwonder01
magicJack Apprentice
Posts: 21
Joined: Sat Feb 02, 2008 10:14 pm

getting busy tone on outgoing call

Post by newwonder01 »

synchron wrote:CoolDude:

I've had the MJMD5 running with the Innomedia ATA now for over a week - no problems. Incoming/Outgoing work with no dropped calls fine.

As far as your ATA settings:

MTA6328-2Re Configuration:

SIP PROXY : sip:192.168.0.104:5070
Use Outbound Proxy: YES
SIP Local Signaling Por :5060
SIP Domain 192.168.0.104

mine are slightly different and I suggest:

SIP PROXY : sip:192.168.0.104:5070
Use Outbound Proxy: NO (unchecked)
SIP Local Signaling Por :5070
SIP Domain 192.168.0.104:5070

Make Sure that your router (if you're using one) assigns the PC running MJMD5 '192.168.0.104' as a fixed static address, not dynamically in some IP address range. I also have my Registration interval set to 60 seconds if that helps.

Synchron 8)
Hi Synchron

I follwed all the above, but I am getting busy tone when I am dialing out call, Incoming calls are good.

Any help?
Top
abhishek456
MagicJack Newbie
Posts: 3
Joined: Sat Oct 03, 2009 12:24 pm

Post by abhishek456 »

can you guys post the detailed configuration of SIP Proxy and User account
Top
Post Reply

Return to “magicJack Tips and Tricks”