Magicjack with a pap2

sleepybrown · Post by **sleepybrown** » Tue Aug 31, 2010 2:58 am

Hey I'm a newbie here, but Ive been researching this issue for months and unfortunately no answer. Ive been trying to configure it several times, but now I'm at a standstill. Is any ata device (I have an unlocked pap2) able to use maicjack sip settings. All I have been doing is putting in the sip settings, but the registration always fail. Maybe I need to do more. I used MagicSipac 1.2 to pick up my information. I have a versalink 327 the pap2 is being plugged into. I also do have wrt54g with ddwrt in my arsenal.

sabresfan · Post by **sabresfan** » Tue Aug 31, 2010 5:13 am

You need to run MJMD5 to get your ata to register. Look in the sticky threads and http://magicjackhacks.net/ has a great tutorial for xlite but it's pretty much the same for an ata.

newtoncd · Post by **newtoncd** » Tue Aug 31, 2010 9:46 am

sleepybrown wrote:Hey I'm a newbie here, but Ive been researching this issue for months and unfortunately no answer. Ive been trying to configure it several times, but now I'm at a standstill. Is any ata device (I have an unlocked pap2) able to use maicjack sip settings. All I have been doing is putting in the sip settings, but the registration always fail. Maybe I need to do more. I used MagicSipac 1.2 to pick up my information. I have a versalink 327 the pap2 is being plugged into. I also do have wrt54g with ddwrt in my arsenal.

Pretty much step-by-step .... although, I don't know how the new magicJack upgrade has the affected PAP2.

http://www.phoneservicesupport.com/how- ... t7593.html

cucu007 · Post by **cucu007** » Tue Aug 31, 2010 10:51 am

With the new upgrade, the use of PAP2 is impossible since the password changes in every connect, I think some works need to be done with mjmd5 to get the algorithm adjusted to the new change. Long live magic-jack.

oldtimercurt · Post by **oldtimercurt** » Tue Aug 31, 2010 11:26 am

Don't know what the deal is. I run TC/ATA and am still up since the update. Haven't plugged in dongle. Couple days ago, had Cox cable failure so had to restart things after cable came back. Went into TC and restarted MJMD5 and back on line with MJ. Just lucky, I guess-soi far,

OTC

arcadia2uk · Post by **arcadia2uk** » Tue Aug 31, 2010 4:19 pm

sabresfan wrote:Recent problem with ata users http://www.phoneservicesupport.com/do-n ... t9603.html There's no known cure for this yet.

sleepybrown · Post by **sleepybrown** » Tue Sep 07, 2010 3:40 pm

Thank you all. Unfortunately I had a power outage and lost my sip info prior to when the update was around so I had to plug it back in. The password did change to a longer one, and Ihad to try a dump twice to catch it. I used those credentials and passed it through mjmd5 and it worked.

My only two questions are does my computer have to stay on with mjmd5 since I do like to turn off my pc every once in a while, and did anyone have luck running mjmdj on their ddwrt router?

crackerjack · Post by **crackerjack** » Tue Sep 07, 2010 4:00 pm

sleepybrown wrote: did anyone have luck running mjmdj on their ddwrt router?

"There's an app for that"

You'll find it on this site

sabresfan · Post by **sabresfan** » Tue Sep 07, 2010 4:03 pm

Yes your compuer need to stay on if you run mjmd5 on it and use a pap2. DD-WRT works great for running mjmd5 http://www.phoneservicesupport.com/ddwr ... t6913.html Please take the time to read the entire thread on the dd-wrt version of mjmd5 as there is a wealth of information in there.
Good Luck

magicJack and magicJack Plus Support, Reviews, FAQs and Tricks

Magicjack with a pap2

Magicjack with a pap2

Re: Magicjack with a pap2