magicJack and magicJack Plus Support, Reviews, FAQs and Tricks

noetic1

Differences I noticed compared to my settings.

NAT Mapping Enable: No
Outbound proxy: blank
Use Outbound proxy: No
Use Auth ID: No

noetic1

:? OK OK I just joined this forum and have several questions.
1) Is the password I enter into the Tomato INIT script the password I get from the SIPDump ?
2) Is the User ID & pasword I enter into my ATA the info I get from the SIPDump ? ie. [email protected] ...

noetic1

This typically means that you are executing the command from the wrong folder (i.e., mjproxy is not in the jffs folder).

Telnet to your router, go to the 'jffs' directory and type ls to 'list the files in the directory'. and doublecheck that mjproxy is in the jffs folder. You should see mjproxy ...

noetic1

command = mjproxy 0.0.0.0 5070 proxy01.chicago.talk4free.com 5070 your_MJ_password (with your correct proxy and password)

Did you verify that you successfully completed step 8 where it says to 8. Put command line in Tomato Administration/Scripts/Init tab ?

This step automatically executes that ...

noetic1

That is strange. I actually powered down my modem, router (running Tomato/MJMD5), PAP2NA, 1GB switch and NAS because my NAS was acting up and I couldn't access files in it.

I powered everything back up and verified I had a dial tone on my home phone and that I could ring my cell phone.

I recommend ...

noetic1

Mike - Glad you were able to work through the settings.

I've been using this setup since my original post and it has been running solid. I'm sure you won't be disappointed.

noetic1

I opened an account at photobucket.com where you can upload the pics and then copy the image link to your post.

noetic1

nakamoniel-
I second OTC's recommendation since I use Stroths utility to get my MJ SIP information.

Below is a link to Stroths post which has with a link to download his utility-
http://www.phoneservicesupport.com/stro ... t4230.html

noetic1

I bought an expansion kit for my t5720 which came with the riser card and an upgraded 50W power supply.

The PCI riser card that came in my kit looks alot shorter than the one in the previous post.

I put in a new PCI video card and there is no way I would have been able to install it without the ...

noetic1

Please delete your posts in the other threads. It's confusing to folks when users post the same message on multiple threads. You need to give people time to answer.

Based on your screenshots below, I gathered your current config is as follows. Can you confirm.

PC = 192.168.10.193 (where you are ...

noetic1

For those weary of renewing their MJ for 5 years thinking they will only get 4 years, it looks like MJ fixed this on their end. I just renewed my account for 5 years by going to the my.magicjack.com site and clicking on the "Extend your license" link. After I entered my credit card info and ...

noetic1

Go to this thread http://www.phoneservicesupport.com/disabling-voice-mail-t7044.html to get the directions for disabling your voicemail. I put my GV number at the top. Setup your GV number to ring your home and cell number and thats about it. If someone calls your MJ number it will ring four times ...

noetic1

I tried it on my PAP2.

Cfwd No Ans Dest: MJ number
It rings a few times, then I get thrown into the test message guy. This Ymax call was successful, blah blah.

Cfwd No Ans Dest: Google Voice Number
I get thrown straight to google voicemail, no ringing and it ask for my pin.

I'm also using an ...

noetic1

It's great now that MJ's voicemail can be turned off and use GV for it instead. Using the transfer option with MJ to GV I get eight rings on my home phone now with the option to transfer to my cell after four rings and still ring my home phone at the same time. It's nice having the ability to ...

noetic1

I bought my original ATA from Amazon for $50 including delivery. I just ordered a second on eBay for $31 with delivery but all the way from Hong Kong. I'm thinking it'll be a good week or two before I get it.

noetic1

You missed the post just before yours from laserjobs.

MagicJack has blocked the sipsocery.com IP address so you'll never be able to register from sipsorcery to Majicjack.

noetic1

Hey OTC,
I stopped running mjproxy on my t5720 since I was able to get it working on my router.

I think the sound quality is the same when running mjproxy on my TC vs. my router. But since I leave my modem and router on 24x7, I wanted the flexibility of being able to turn off my TC and still have ...

noetic1

For Tomato users-

I just created a post earlier today which details how to setup a Tomato flashed router to run mjproxy.

http://www.phoneservicesupport.com/toma ... t7055.html

noetic1

Can someone more savvy in Linux confirm if my command below has the correct syntax based on where I uploaded the mjproxy file.

/jffs/mjproxy 0.0.0.0 5070 proxy01.chicago.talk4free.com 5070 mypassword

noetic1

You can either run MJMD5 from a computer or if you have a router flashed with Tomato or DDWRT you can install MJMD5 on the router. The benefit of installing MJMD5 on a router is that you don't need a computer running on all the time.

I just did a write up for installing MJMD5 on a router flashed ...

noetic1

Now that I've got MJMD5 working on my Tomato flashed Linksys WRT54GL router, I thought I'd consolidate all of the information I found in this forum and from PMs to help other newb's.

Thanks to jeffnyc, qwer1304, and Taken83oveR's post on the following thread for guiding me- http://www ...

noetic1

Guys, I still need help. I did the steps below and I'm getting the dreaded 'Can't connect to login server' registration state on my PAP2 NA. Any suggestions on where I could have gone wrong?

Sorry if the screenshots bother some folks but I want to be clear on what I've done and hopefully it might ...

noetic1

Can someone send me with the commands I need to type once I'm connected to my Tomato flashed router using putty to get the following information-

(1) I want to verify that that I uploaded mjproxy to the correct location in my router.
(2) How do I run the the following command "chmod 755 mjproxy" if ...

noetic1

I just bought an expansion slot for my 5720. It cost me $40 on ebay, so the link from stroths for $29 is a good deal.

I found this PDF doc online for the 5720 where it lists compatible video cards which I think works for the other 5700/5710 thin clients: http://h18000.www1.hp.com/products ...

noetic1

OK, I got it all set up with the Quadro. It's definately leaps and bounds over the stock 8mb. With streaming video, it depends on the source. I'm happy with the upgrade. The resolutions and refresh rates are insane.

manasota-
I'm thinking of doing the same thing for my t5720. You got a great deal ...

noetic1

az2008,
I just sent you a PM. I noticed my QOS on Tomato isn't classifying traffic correctly and was wondering if you had a work around. Thanks!

noetic1

I had problems getting localphone to register in sipsorcery too.

I found out that you also needed to register localphone in order for it to work in sipsorcery.

Below are my localphone SIP settings in sipsorcery:

Provider Name: localphone
Username: your UK phone number that you got from localphone ...

noetic1

I've got Sipgate and Localphone working via sipsorcery. But my incoming calls don't work all the time. Actually, it hasn't worked all this week. Has anyone gotten sipgate to ring their phone consistently?

Below is the dial play I setup since calls to tollfree numbers are free with sipgate and ...

noetic1

I had the same issue as everyone here with incoming calls going to voicemail even though I already had the register expires setting to 180.

My setup-
TC = 192.168.1.12 (fixed IP where I am running the proxy server)
ATA = 192.168.1.13 (fixed IP)
Router = 192.168.1.1

I just made the recommended ...

noetic1

You are asking people to forward to 192.168.1.100, but what is this machines purpose in your setup? Is it your ATA? Is it your router?

For example, my setup.

Router = 192.168.1.1 (where I am running the proxy server)
ATA = 192.168.1.3

My Setup: (for what it's worth)

PC = 192.168.1.111 (where I ...

noetic1

newtoncd

I haven't done it yet because I haven't upgraded my Flash on my TC5710 yet.

In old posts from Thin Client forum Stroths has a discussion about upgrading the Thin Clients. He has a modified flash image for larger flash that includes .NET 2.0 which is required to use MJMD5.

I'm going to ...

noetic1

I don't have a DD-WRT router either, but here are a couple binaries compiled using Tomato toolchain.
1. The first one is what I'm running on my Tomato router:
http://www.mediafire.com/file/twkmijnm3mz/mjproxy-tomato.tar.gz
It might work on DD-WRT - I have no way to check myself.
2. If the 1st one ...

noetic1

Looks like I missed the initial registration period. Voxox isn't accepting new accounts. A new version is supposed to be coming and you can sign up to get notified once it's available.

noetic1

I had the same issue with my Linksys WRT54GL. It worked fine for months then I just couldn't make any more calls. I flashed with DD-WRT but then re-flashed with Tomato so that I can do QoS. I personnaly prefer Tomato over DD-WRT.

http://www.polarcloud.com/tomato

noetic1

Thanks for the heads up Mark (aka - az2008).

I was wondering why my MJ call quality deteriorated the past couple of weeks even though I am using a dedicated MJ thin client with a Linksys WRT54GL flashed with Tomato and QoS set up per your instructions.

I did a quick check tonight and it looks like ...

noetic1

I bought a t5710 originally with 1.1GHz and 256/256 and was able to get MajicJack working on it.

So, I would imagine that it would work but a little slower.

Care to share where you can get them for $20? I'd like to get one for my mom.

noetic1

I couldn't agree more VaHam.

Good call on TeamViewer HolmanGT!

It is definitely my preferred application for connecting to the computers on my network (especially now that I can connect by IP address).

noetic1

The file download from HP has 3 methods built-in for flashing the BIOS.

I used the WFlash method. It's a Windows-based utility to locally update the system BIOS on individual computers operating in a Microsoft Windows environment.

For the WFlash method you just click on the .exe file and it will ...

noetic1

I was finally able to connect to my TC via IP address on TeamViewer.

I totally forgot about allowing Remote Desktop connections to my TC via System Properties. After I clicked the checkbox to "Allow users to connect remotely to this computer" I was able to connect to my TC via IP address ...

noetic1

Thanks newtoncd,
I was so focused on the dates that I totally missed that in the description.

I just reflashed the BIOS and all looks good and I am now at 786R2 v1.02.

noetic1

How can I delete Remote Desktop Connection from my 5710?

I use TeamViewer to remote connect to my TC and have no use for Remote Desktop Connection.

noetic1

My 5710 has the stock BIOS version 786R2 v1.00 and I'm thinking about flashing it to the latest version.

However, I'm confused as to which is the latest version. Can someone confirm which of the following versions is the latest?

Version: 1.08 A (24 Feb 2005), sp29573.exe (2.0 MB)
Version: 1.02 A ...

noetic1

VaHam-
noetic1 Are you running the stock HP downloaded version of XPe or some other distro?
I'm running the stock XPe image from HP ver 5.1.336

http://i337.photobucket.com/albums/n367/noetic12/MajicJack/HP-TC_system_info.jpg

Are you running any anti-virus and are you certain that either ...

noetic1

Holman-
That's interesting. I wonder how VaHam got his free version of TeamViewer to work then using IP addresses.

noetic1

VaHam-
Yup, I was able to successfully ping my TC's IP from 2 other computers with no lost packets and an average response time of 1ms.

noetic1

OK, so I upgraded TeamViewer in both my desktop and my TC to the latest version (ver. 4.0.5474) and verified my configuration matched VaHam's screenshots.

http://i337.photobucket.com/albums/n367/noetic12/MajicJack/TeamViewer_ver2.jpg

But still no luck. I am able to connect to my TC via ID but ...

noetic1

VaHam-
I verified that I have the exact settings that you have (based on your screenshots) and I was still unable to connect to my TC via IP address.

http://i337.photobucket.com/albums/n367/noetic12/MajicJack/TeamViewer_error.jpg

I did notice that your Advanced Options looked different from what ...

noetic1

idle15-
I replicated your results exactly. TeamViewer worked fine using the TeamViewer ID but not by the static IP Address I set up.

One additional change I made was to go to TeamViewer Advanced Options and clicked on the "LAN Connections only" checkbox in the Network section in both the TC and my ...

noetic1

testing -
Wow, you got an absolute steal for your TC and I thought I got a good deal.

Quick question, how do you run memtest? I tried to download the various files from memtest86+ but couldn't get them to run and kept getting a drive error after changing the first boot order to USB.

noetic1

Looks like I got lucky again. The 1GB stick works perfectly and it's not even pc2700 RAM. BIOS says 00 but HP System Information lists 1024MB in Memory Slot 1.

I installed Kingston ValueRAM 1GB PC3200 400MHz DDR1 which I bought at Buy.com last month for my wife's laptop. I figured it would be ...

magicJack and magicJack Plus Support, Reviews, FAQs and Tricks

Search found 65 matches

Tomato Version of MJMD5 (aka mjproxy)

How can I delete Remote Desktop Connection?

What BIOS version are you guys using for 5710?