magicJack and magicJack Plus Support, Reviews, FAQs and Tricks

pancho1950

Majic Jack - No sound on my end???????

I've tried all the worthless suggestions at the Majic jack website; unplug modem, unplug Majic Jack, unplug phones, tried different phones.....nothing works.

Folks on the other end can hear me, but I can't hear them.

Please help.

Thanks.

Need to open ...

pancho1950

I've been looking for info on how to reverse SIP info and apparently this has been dead in the water for a while. I wanted to do what I can to help figure out Authentication reversal so credentials can be used with other VOIP software. From what I've gathered so far magic jack software takes the ...

pancho1950

stargate wrote:what is error 401? how do you fix it? this is the error i get when trying to download magic jack.

error 401 Username and / or password incorrect

pancho1950

I can dial out and can hear the other people but they can't hear me at all. I have only had MJ for a month and haven't used it that much - already problems! I tried unplugging and resetting. It's not my phone. Please help!

I do not know what router or modem router you have. You may want to read ...

pancho1950

Ok, this is happening sporadically. I have checked another phone, and it does the same thing, so no, it's not the phone itself. I try to place a call, i can hear the dial tone, and the tones of the number dialing, but once it connects, the phone will be silent. I hear nothing, and no-one hears me ...

pancho1950

shepco wrote:Will it Work? I can't get a dial tone. Could it have something to do with the version 3 MagicJack having reverse polarity?

Probably to much load on mj.

Pancho

pancho1950

trying to add a year to my majicjack and says password doesnt match email add
i have changed my email and cant remember it what can i do

Go to my.magicjack.com just put in your phone number and your password no need to put your e-mail; then do your changes ei. change or add an e-mail

E-mail ...

pancho1950

fillmorerv wrote:I WAS HOPING TO FIND OUT IF I CAN ACCESS MY ROUTER FROM THE MJ PLUS WIRELESS, SO THAT WI FI IS AVAILABLE IN A TRUCKSTOP, I COULD USE THE MJ PLUS.

Yes you can do that with a client router like; a router with dd-wrt firmware if you know the wep or wpa password.

Pancho

pancho1950

i hope someone can help me to get my phone working it a magic jack i am unable to even call out it show an error 6 message so i took it all out so if you can get me with the right person to do this it would so helpful

You may try this link

http://www.phoneservicesupport.com/magicjack50831.html

pancho1950

Congrats

pancho1950

http://www.videojug.com/film/how-to-beh ... rnet-forum

pancho1950

jonshepi wrote:How do you prevent the call from dropping syllables? It's not every other, but it makes it hard to understand what the person on the other end is saying.

You may try this link to test your conection.

http://myspeed.visualware.com/index.php

Pancho

pancho1950

I am looking for a copy of X-Lite 3.0 build 53621. I want to give XlitejackPlugin a try, but have only been able to locate X-Lite 4 and X-Lite 3.0 build 29712. The link on Rapidshare only links to an html telling me that I "need RapidPro to downloade more files" (even though I've never before ...

pancho1950

Anyone know how do decrypt an "SJEN" file?

As I can see in the MagicJack.exe file I can see 4 call: DecodeBase64, EncodeBase64, DecryptRC4, EncryptRC4

I thinking they encrypt those file with Base64 and RC4

Here is some file that i rip form a bug report to test on:

http://www.mediafire.com ...

pancho1950

BOOST wrote:@pancho1950 how can I apply for VPN? Do you have an idea how much it cost? Thanks!

http://www.keepandshare.com/doc/984996/ ... -213k?da=y

pancho1950

kevin8629 wrote:Hp 5520. I purchased 2 currently using one. Works perfect, just setting on shelf collecting dust. $50.00 shipped

Where are you located, and form of payment?

pancho1950

In your efforts, you will also want to keep an eye on the list of codecs as it has also recently been updated to include some new ones not available on many ATAs.

Examples would be Speex codec variations and use of the G.711.1 wideband codec at 16000 samples per second (rather than the typical G ...

pancho1950

BOOST wrote:@ neo2121 tnx for your reply. what is VPN?

Virtual Private Network

pancho1950

scottexpat wrote:impossible!

passwords keep rotating.

I bought the Nettalk device as a replacement.

Plugs into router.

No more programming or hacking.

Hopefully better. .

Passwords are not ratating anymore since three days ago

pancho1950

magicjackloaderexe ver. 2.0.5624.3932
magicjack.exe ver. 2.0.562.4 (A92105XXXXXXXX).
I belive that the new software is generating the new passwords every time is hook up. Reason to belive that when I recieved the update it ask me for my login credentials (e-mail adress & login password) with the ...

pancho1950

genxweb wrote:If you are using mjsip and get 1IJIJIJIJIJIJIJIJIJIJ let me know I will add a filter. After my first release they added a lot of crap that matched the search string regex I use.

Yes I been getting the same thing in mjsip and also with magicsipack 1.2

pancho1950

Would it help if we also post our MJ software versions? as posted above mine is still on 2.04.
magicjackloaderexe ver. 2.0.5624.3932
magicjack.exe ver. 2.0.562.4 (A92105XXXXXXXX).
I belive that the new software is generating the new passwords every time is hook up. Reason to belive that when I ...

pancho1950

genxweb wrote:I have corrected the links. Thanks for the heads up. Thats what happens when you past from a word processor.

Thank's
Pancho

pancho1950

I am in same boat as everyone. I have MJ running via my linksys TMobile router with mj proxy loaded on it. I have been running it like this for over a year.

I guess I need to look for my new password like everyone else has done. The problem is, It's been so long, I forgot how to do this.

Can ...

pancho1950

None of the links in that page work's

pancho1950

just an update... the password is there and I got it a long time ago and I did not know... I have to use MJMD5, after that, I can use X-Lite fine. Next step will be setting up an ATA.

Just use sipdump and look yourself in the dumped file. The password is 20 characters and in my case it was several ...

pancho1950

newtoncd
Real nice tutorial I think I'll pdf
thank's
pancho

pancho1950

newtoncd wrote:I just wrote up a quick tutorial on how to setup the mjmd5 and the Linksys ATA. Should I post the steps or does everyone pretty much have it under control?

It would be nice if you do that

Thank's

Pancho

pancho1950

ronjr7700 wrote:I was just wondering if there is a way that I can just dial the number without having to enter the area code first other than clicking on the contacts?

You may try this.

http://www.phoneservicesupport.com/a-wa ... t7085.html

Thank's

Pancho

pancho1950

MJ won't let me dial using contact list. Clicking on a contact works fine, but only if its a number in my home area code. If it's not, MJ with place the number in the dialing field for only a split second, to be inexplicably replaced by my onw MJ number! Using individual area codes in the script ...

pancho1950

Made a little program just have to key in your area code;will work with 411 and 911.
hxxp://www.mediafire.com/?mzzdxb3fxem
change the xx for tt
hope you like it

Pancho

pancho1950

@TOF
I see people here that claim they are getting the password...but i could be misunderstanding!

I think i saw something suspicious! and its in MD5 format but i can't get to reveal it! you know a good MD5 Craker? i tried my cisco secret 5 but that didn't get me any where?

Hope this will help ...

pancho1950

Here is my password finder
http://rapidshare.com/files/267007495/AutoMagicJack.zip.html
you have to remember, the password is not enough, you still need you username, and use MJMD5 (MJ proxy)

Ok, so how this work, first its in dos, i only have tested it under Xp and 2003

you start PM.exe, wait a ...

pancho1950

Cyclon

Hook your internal telephone modem where it says line to the phone output of your magicjack then you can use any dialer (internal fax or ms dialer).

Pancho1950

pancho1950

Made this code if some one want to try it is a mod of original from apple123; change ### for your area code in $CheckAreaCode = "###" and also in $var = "###" & $var. Works just as regular phone dialing system "1"+area+phone # for USA calls and "0" for international; It worked in geode base computer ...

pancho1950

ScarEye:

Did everything when I try :wp to save it this is what it said "/etc/init.d/mjproxy" Read-only file system.

Thank's

Pancho1950

it should be :wq <------ W and Q

NOT

W and P

Hope this helps.

Sorry was a typo i did :wq
this the firmware Firmware: DD-WRT v24 (05/20/0 voip
Time: 18 ...

pancho1950

ScarEye:

Did everything when I try :wq to save it this is what it said "/etc/init.d/mjproxy" Read-only file system.

Thank's

Pancho1950

Sorry was a typo i did :wq
this the firmware Firmware: DD-WRT v24 (05/20/08) voip
Time: 18:54:15 up 30 min, load average: 0.19, 0.16, 0.08
WAN: Disabled

pancho1950

I'm having a custody battle with my son's mother and she is on crack real bad and I want to be able to record my conversations with her for reference to her habits and attitude towards me and not wanting me to see me son. I sthere any kinda program I can download to use with softfone or any ...

pancho1950

Happy birthday netdata

pancho1950

In running some diags, i noticed a wireshark message with "realm=radius.com" in it somewhere.

My question is why is it only some accts that are affected? Will the be going after all accts soon? Does this process cost them $??

stratus.com is a domain controlled by two nameservers at stratus.com ...

pancho1950

jimisbell wrote:How do you download the upgrade???

Go to hxxp://upgrades.magicjack.com/upgrade/upgrade.exe and download it change the xx for tt

pancho1950

If you see it in wireshark it would be encrypted "sj" that tells me something it has to do with the register SJ-DISCOVERY-ANNAUNCEMENT-PROTOCOL

pancho1950

I was trying to reformat the hard drive in my TC and I think I formatted the MagicJack which was shown to be a 16MB disk.....and I didnt realise it was attached....and just said, "what the hell, I didnt know I had a D drive, so yes, format it." Stupid.

Is there a way out??? Can I send it in for re ...

pancho1950

In the dump file that I did with pmdump.exe right after mj started

pancho1950

hey have you tried that yourself? did it work? pls share what if anything you got by doing what you are saying....thanks

I saw my serial # several times but I do not know what it does may be some one other than me should do it also

if you are "seeing your several times" pls post a copy of ...

pancho1950

Use pmdump.exe dump it to a file then use strings.exe to convert unicode into plain ascii then search for your serial num and how is sent to server

hey have you tried that yourself? did it work? pls share what if anything you got by doing what you are saying....thanks

I saw my serial # several ...

pancho1950

Yes; There is much info in the net on how to do it

pancho1950

testing123 wrote:Has anyone attempted/succeeded in running an mj on a PC using Bart PE or one of its derivatives? (i.e., UBCD4Win, etc.)?

Very curious about this. Thanks

Try Windows FLP it will work fine

pancho1950

an ata cant emulate that can it?

you can find your serial # by going into my pc right click manage device manager DVD/CDROM devices double click in to YMAX MagicJack USB Device details
USBSTOR\CDROM&VEN_YMAX&PROD_MAGICJACK&REV_2.00\7&10CE61F0&0&A9XXXXXXXXXXXX&1
tHE A9XXXXXXXXXXXX WOULD BE YOUR ...

pancho1950

Does anyone know if the serial number of the dongle is being sent, is there a way to sniff the packets and reveal absolutely everything?

The serial number is what uniquely identifies the MJ. It is encoded and encrypted in the dbkey. an ata cant emulate that can it?

you can find your serial # by ...

magicJack and magicJack Plus Support, Reviews, FAQs and Tricks

Search found 54 matches

Re: Majic Jack - No sound on my end???????

Re: Want to help obtain credentials

Re: error 401

Re: I can hear them but they can't hear me

Re: Phone goes silent once call connects

Re: Old rotary dial payphone w MagicJack

Re: lost password

Re: MJ WIRELESS

Re: i need help to downland magic jack

how to behave on an internet forum

Re: dropping syllables while on the phone

Re: Need X-Lite 3.0 build 53621

Re: Need help decrypt SJEN file!!!

Re: Thin Client for sale originally purchased from Alpman

Re: register ATA

Re: "How to" setup mjmd5 and Linksys PAP2T ATA

Re: Is there a way to not have to dial area code

Re: good script but..

Re: Password extractor

Re: Are you able to record a phone call conversation with mj

Re: Agreed

Re: I erased my Magic Jack???

Re: MJ on Bart PE or derivative?