magicJack and magicJack Plus Support, Reviews, FAQs and Tricks

antman1

OK I fixed it. I named the partition "phone" then created a folder "Magicjack" then put the file "Magictalk.exe" in the folder then ran auto run and it fired up and fixed itself.

antman1

I was reinstalling WindowsXP and deleted a partition labeled "phone" then realized it was the magicjack partition. I tried doing a partition recovery and it failed to recover. I downloaded a tool called "mjrecover_setup.exe" and it says the device is not found. I tried creating a fat partition and ...

antman1

Callers that are unknown must state their name before it rings to me.

antman1

Magicjack may have lost me. I am lovin privacy director from google working on my ata and such.

antman1

Yes it is possible because I finally achieved this today. It works great and sounds great. I had to use the dial out plan posted here and had to use a dial in plan to be able to receive calls on my ATA. Then I found out magicjack would not forward to my google number (not sure why). So I had to ...

antman1

gizmo calls I believe are free between one another and with Google Voice now combined with Gizmo it can send the calls to Gizmo5 for free usage. I just wish I could receive the calls on my ATA from sipsorcery with my gizmo account. I posted the question on sipsorcery forums but no responses yet. I ...

antman1

ok thank you for your help. I will check the sipsorcery forums and see what it might be. Thank you

antman1

I have it set to gizmo on my google voice but when i call my google voice number it does ring me. I was thinking it must be a setting in sipsorcery that I dont have setup. I noticed it had a dial out and dial in plan and was wondering if that had to be setup a certain way

antman1

that dial plan is perfect! It allows me to call out with google voice with no probs. now my next issue is that I would like to have my incoming calls ring from GoogleVoice to my ATA with the same sipsorcery login i am using for making the calls. then I can forward all my calls from my magicjack ...

antman1

I am lost. I followed a guide that had me setup GV with gizmo on sipsorcery then create a dial plan with the info and i found that on the dial plan when i call out it calls what ever number i put in the dial plan even though i punch in a different number on my phone. Also no incoming calls are ...

antman1

I dont quite understand what to put on this. It says this:
"1132701859 this is the destination number you wish to call and can be ANY US landline number (I don’t know whether mobiles or any others will work)."?

What number should I put there? And will this allow me to make calls like normal? I saw ...

antman1

I have a RTP300 and while Magicjack rotates the passwords I would like to try an alternative. I saw someone setup sipsorcery to use googlevoice to receive calls on the ATA and sipgate to make the calls. Does anyone know how this can be done? I have google Voice set to send the calls to Gizmo5 number ...

antman1

I forgot to mention I was also upgraded to client 2.0.562d.

antman1

I am happy to provide any info you need. I want to help. I had my magicjack Sip info put into my RTP300 and was working fine for a year then as it came time to renew my subscription my ATA would not register (my guess is the sip credentials changed then. I plugged in my magicjack dongle on Thursday ...

antman1

Looks like my username was changed from 01 to 02 at the end of my number and my password was changed when I had to renew my membership this year and my ATA was working without doing anything special but now I had to setup my tomato running Linksys router to run mjproxy so my ATA would register on ...

antman1

Ok with siphon installed go to cydia and uninstall it. Then clear all settings in the settings section. Then reinstall it. That is what I did and it worked.

antman1

I am on ios4.0.1 and am noticing that I am not able to get into the setting page. When the settings page pulls up it it missing everything. the page is blank. Anyone know of any fixes for this?

**EDIT** I found this version fixes all my problems and I tested it as working good with IOS4 "Siphon-2 ...

antman1

it should. there is a list on this site of other servers. you dont have to use the IP of the proxy server but I like the IP better.

antman1

This person is not helping just SELLING / SPAMMING this forum, from my point of view.

It looks like you have gained a mistaken impression in your short time on these fora. Please reconsider your narrow-minded comments.
Neo has been a significant contributor to these proceedings for more than a ...

antman1

I just wanted to come back and give big Kudos to neo2121 for his help. He helped me make sure my info was correct and then informed me that my Siphon was an older version. After reading his thread about the beta Siphon I was able to install the newest Siphon and all is great. Thank you a lot neo2121 ...

antman1

I believe I found my pw on my magicjack but I cannot get it to register on my ATA or my iPhone to register. They both fail. I have two magicjacks, I have the pw for my other one as well and it does register but this new one does not want to do it. What could I be doing wrong? I do not have the ...

antman1

yes they have done it for me twice now

antman1

I had a prepaid phone with a prepaid number. Then I called T-Mobile and spoke with the people over the phone and they ported my number from Comcast. did it within 24hours. I was impressed.

antman1

I had the same problem. This was a week ago. What I did first was update my agent string and then I tried it again. It still did not log in so then I thought my RTP300 days were over so I hooked up my Magicjack dongle (without my rtp300 plugged in) then it said "Upgrading Lucky You" and then when it ...

antman1

It is either a faulty answering machine or you may need to change your settings on your pap2 to match mine on this post here: http://www.phoneservicesupport.com/rtp3 ... t8785.html

Good Luck.

antman1

I am using a RTP300 router unlocked with Magicjack as my service. I am running into a new problem. I love the RTP300 because it does call forwarding no answer and that rocks cause it goes to my cell phone but....

After working most of the bugs out in my settings I hear a lot of noise, noise like ...

antman1

I just wanted to report back that so far so good. This does seem to be the correction for my problems. If anyone else has this problem you may want to try this out.

antman1

After a little research I found that some others had the same problems and here are the settings they changed to correct the problem:
http://img689.imageshack.us/img689/3522/ringsettings.jpg
That's what I have changed mine to and I will report back if this corrects my problem. If anyone else has ...

antman1

T-Mobile prepaid is cool because I have the pay as you go and I can put a $10 card on my phone and then just leave it alone don't have to use the minutes as they don't expire for a year so I don't pay monthly charges or anything and people can call my old number and leave messages and I check it ...

antman1

I am having a weird issue. I have my RTP300 connected directly to a modem with no PCs or anything else and when someone calls me they tell me they let it ring several times and then it went to voice mail. On my home equipment it shows me that someone called on my caller Id but my phones did not ring ...

antman1

What I did was get a Prepaid T-Mobile phone and port my landline to it so I wouldnt lose it until I can get it were I want it.

antman1

FXS Port Input Gain: = -3
FXS Port Output Gain: = -3

antman1

Not sure how to do this on MacOS, but on a WindowsPC you would disable Autorun for the Magicjack app so that when the dongle is plugged in it does not run Magicjack app. You may also force Quit the Magicjack app once it is loaded and the dongle should still work for Skype. Good Luck with it.

antman1

More information needed! Do you have echo with all your calls? Are the echo related to specific callers? Are these callers using cell phone or PSTN lines? Are you using headphones? Does the echo exist if you try a different analog phone? Does the RTP300 have settings for:

Echo Canc Enable:
Echo ...

antman1

Thank you. that worked out great. It is all working. My other issue I am running into now is I have a couple of friends that are telling me I have a bad echo. Anyone else having this problem? If so, is it normal? Thanks a lot for your help guys.

antman1

I have been using my RTP300 that used to be with Vonage for Magicjack now since August. I have been using it with very little problems but I am noticing big issues now. I get a lot of static at times (may be eliminated with a new phone gonna try that) but my big issues are sometimes I will call out ...

antman1

Kinda an old post but I will ask. I have this router and I was using it but sometimes I will try to dial out and it will lock up the router and show like the line is in use and never stop. then lately I noticed that now I can make calls out but cannot receive calls. It tells callers that they have ...

antman1

I dont think I have my RTP300 Setup correctly to use Sipcorcery. for the proxy I tried sip.sipsorcery.com and it failed to register. I tried proxy01.sipphone.com and it registers but I think it is connecting direct to Gizmo service. I would like my ATA setup to use Line1 for MagicJack and Line2 for ...

antman1

steps 5 and 6 are unclear to me. I dont understand how to get Gizmo5 setup in sipsorcery (or if I am doing it right) and I dont understand how to set it up on the ATA.

antman1

I have my RTP300 setup exactly like the one in this guide and I was wondering if anyone would know how to set it up to use the correct time zone for Central Time because my callerID is off on it. It is giving the wrong time for Central time. I would also be fine with it being Eastern Time because I ...

antman1

I believe what he is saying is that the dongle is broken so for him plugging it in is prolly not possible.

antman1

Your answer is in here: http://www.phoneservicesupport.com/stroths-mj-utilities-1-6-sip-info-more-8-2-update-t4230.html

I was telling everyone that because I found out that the normal Stroth Suite doesnt work with the new update the begining of the month. This topic showing this is pinned at the ...

antman1

I was playing with it a little and got this from sipdump. I got my info and the new string in case anyone needs to update there ATA Agent string is: MagicJack/1.80.499b (SJ Labs)

Hope that helps.

antman1

I am at a loss with this one, I used "Stroths MagicJack Utilities Suite v1.6" and got my SIP info and I was going to check today to see what ver magic jack I was using to update my "SIP User Agent Name" and "SIP Reg User Agent Name" on my RTP300 and it seems the utility cant find the SIP info ...

antman1

I can sympathize with those that have mj and it locks up there PC. I was doing some testing for my aunt to see if she can use the MJ dongle for other purposes and it was locking up my other machine without even using the software. It was only detecting the dongle. It works fine on my primary machine ...

antman1

My problem is fixed about the router locking up if I forget the area code. Dont forget to change the dialing plan everyone. That fixed it for me. As far as the other issues. All of them went away. lol. It is working great. I switched servers though because the one I was on didnt dound as good ...

antman1

I followed these screenshots and everything went great I can receive calls and make calls now. My issues are small. my voicemail indicator stays on all the time and never goes off even though I dont have a message. the other thing is that sometimes when someone calls I answer it and no one can hear ...

magicJack and magicJack Plus Support, Reviews, FAQs and Tricks

Search found 47 matches

help, I deleted the partition labeled phone

Googlevoice/gizmo5 with sipgate for my ATA as backup

RTP300/PAP2 New Noise Problem

RTP300/PAP2 help recieving calls -- SOLVED

Magicjack help for RTP300